How to make sodium tetraborate for slime with your own hands

Sodium tetraborate is an antiseptic with boric acid, soda in the composition, mixed with glycerin, used by slimers as a thickener. It stabilizes all types of working glue.

The drug is sold in pharmacies at a price of 25 rubles. for 30 ml. It can be added to slimes in pure form or with water. But there are substances similar in composition to pharmaceutical sodium tetraborate. You can also make a similar activator yourself.

From soda

The main ingredient of this recipe must be purchased at the pharmacy, and soda is sold in the grocery departments of stores. The amount of the latter is calculated here. But if more soda is used than necessary, it’s not a big deal. Boric acid simply will not absorb the excess volume; the food additive will remain at the bottom in the form of sediment.

Ingredients for preparing the activator

  • 30 ml of boric acid alcohol mixture,
  • 1 tsp. baking soda.

How to make sodium tetraborate with your own hands

  1. Boric acid must be poured into a deep container.

  2. Then the required amount of soda is added to it.

  3. The components must be mixed until most of the grains are dissolved.

  4. Then the liquid must be filtered through a thick cloth or napkin to remove undissolved soda, and the thickener is ready.

Watch in this video how to make sodium tetraborate at home from soda:

Safety precautions when making tetraborate at home

Obtaining substances at home is a very exciting pastime, especially for children. Despite the fact that sodium tetraborate is a fairly harmless substance (hazard class 3), you should not neglect safety measures:

  • Children must work directly under adult supervision. Even in the simplest manipulations with chemicals there is a risk of injury. And the production of borax from dry sodium hydroxide can only be carried out by an adult.
  • It is best to use gloves when working, as the substance can cause allergic reactions if it comes into contact with the skin.
  • No food during the experiments - there may be a substance on your hands that gets into your mouth with food. If ingested, the lethal dose of tetraborate is 10-20 g, for children 4-5 g.
  • Sodium tetraborate obtained at home cannot be used for medical purposes! If the drug was prescribed by a doctor, then you need to purchase it at the pharmacy, since the concentration of the active substance in dosage forms is strictly observed.
  • After work, be sure to wash your hands!
  • If trouble does occur and chemicals get into your mouth or are swallowed, seek medical help immediately!

Of water

In this recipe, before mixing, the water should be slightly warmed up so that the soda dissolves in it better and faster. It is more convenient to place all components into the bottle through a funnel. Then the entire measured amount will be used and not spilled or spilled.

Proven recipe

  • 1 tbsp. l. water,
  • 1 tsp. soda,
  • 1 tbsp. l. boric acid.

Cooking method

  1. The specified amount of soda must be poured into a plastic bottle.

  2. Water is also poured there.

  3. Another essential component is boric acid.

  4. The bottle must be closed and shaken to mix both liquids and dissolve the soda in them.

  5. Then the composition is filtered through a cotton pad to get rid of the remaining particles of soda, and the activator can be used.

Watch this video for a DIY recipe for sodium tetraborate from water:

From boric acid powder

This recipe produces a weaker activator than traditional sodium tetraborate. It works primarily with thick office glue and is added in fairly large quantities. The slime will need to be kneaded for a long time and excess liquid squeezed out of it.

Components

  • 30 g boric acid powder,
  • 500 ml water.

How to cook

  1. Pour water into a container with a lid.

  2. Then boric acid powder is poured there.

  3. The container should be tightly closed and shaken thoroughly to dissolve the crystals.

What is the drug

Sodium tetraborate or borax, borax, is a special compound with an alkaline reaction, a salt of boric acid. It is a strong antiseptic with bacteriostatic activity.

Can be used for various purposes. Often acts as an antiseptic for various fungal diseases. It is often used in crop production as an insecticide and pesticide. Can be added to enamels and paints, detergents and cleaning products. Glass production cannot be done without boric acid. The drug is also necessary when making slime or slime.

Why is this component needed when making slime?

Sodium tetraborate is almost always included in slime. It acts as a thickener. The children's toy becomes elastic, but at the same time viscous and elastic.

From borax

Borax for this method of mixing the activator can be found at a hardware store or wherever repair supplies are available. Glycerin is available freely in pharmacies. To heat the mixture, you don’t need to use a microwave, but simply put a closed container with it in hot water for a few minutes. In principle, the activator will work without this. But if the liquid is heated, it will become more transparent.

What to make from

  • 1 tsp. drills,
  • 4 tsp. glycerin.

Making a thickener at home

  1. Borax must be poured into a mixing container.

  2. Then glycerin is added to it.

  3. Now the container needs to be closed and shaken several times so that the borax crystals combine well with the gel liquid.

  4. Then it is placed in the microwave for 30 seconds, after which it is shaken again, and the activator is ready.

From laundry soap

The soap should first be grated so that its particles are very small. But after adding the chips, you can also put the mixing bowl in the microwave for 30-60 seconds. Heat will help all components connect faster and better.

What is needed to prepare tetraborate

  • 200 ml water,
  • 5 g boric acid powder,
  • 2-3 pinches of shavings of 72% laundry soap.

Preparation method

  1. Place water and boric acid in one bowl.

  2. When the components are well combined, laundry soap is added to them.

  3. The liquid must be stirred with a spoon so that the last of the ingredients used dissolves.

Tetraborate analogues

Instead of sodium tetraborate, you can use products that also contain borates:

  • Spray, ointment, Teymurov's soap. Each of the preparations contains boric acid, so any is suitable for creating slimes. Spray has a liquid consistency, soap has a creamy consistency, and ointment has the thickest consistency. The concentration of the main substance in the preparations is lower than in sodium tetraborate, therefore the listed activators are used in larger quantities. They have a drawback - a rather strong smell. But you can buy the products at any pharmacy.

  • Liquid for lenses. Many of them contain a borate buffer. For slimes you should use Licontin, ReNu, Opti-Free, Biotrue. There are few borates in solutions for CL, so a large amount of one of them should be added to slimes. Another important nuance is that these activators must be combined with baking soda. A little food additive is added.

Safety regulations

Tetraborate is used as a preservative in creams and as an antiseptic, which can be applied to mucous membranes. Therefore, slime made with its addition is suitable for play. After all, when used correctly, the product does not pose any danger. The exception is people with individual intolerance to a chemical solution.

Tetraborate may cause a chemical reaction. In this case, it is better not to use it.

When preparing slime with the addition of sodium tetraborate, you must adhere to the following safety rules:

  1. avoid contact with eyes;
  2. do not ingest;
  3. do not make edible slimes with this substance;
  4. Use only special containers when making slimes;
  5. After playing with slime, you need to wash your hands thoroughly with soap.

Slime with tetraborate from office glue

With this method of creating toys, you can improvise with the ingredients. For example, liquid soap is replaced with shampoo or shower gel. And if there is no lotion, you can add more nourishing cream. The activator is prepared from 2 tsp. sodium tetraborate and 200 ml of lukewarm water.

What to make from

  • 80 ml stationery glue,
  • 1 tsp. nourishing cream,
  • 1 tsp. liquid soap,
  • 1 pea of ​​toothpaste,
  • 0.5 tsp. body milk,
  • 3-4 tbsp. l. shaving foam,
  • 0.5 tsp. dye,
  • 0.5-1 tsp. dilute sodium tetraborate.

Cooking method

  1. The glue is squeezed out of the tube into a large container.

  2. You need to add cream to it.

  3. The next ingredient is toothpaste in a small amount.

  4. The composition must be supplemented with body milk.

  5. It should also contain liquid soap.

  6. The volume of the slime will be greater if shaving foam is added to the composition.

  7. The next step is to mix everything.

  8. A homogeneous mass can be painted.

  9. All that remains is to add diluted sodium tetraborate.

  10. The base will stabilize after a few minutes of stirring with a spoon.

  11. The collected mass is kneaded with your hands.

Watch this video on how to make slime from office glue and tetraborate:

Causes of errors and their correction


There are several reasons that prevent you from making slime:

  • Wrong choice of glue . It is better to opt for PVA glue from. You can also use silicate glue from various manufacturers. These types of glue are sold in bookstores and office supply stores. When purchasing, you need to pay attention to the production date.
  • Expired sodium tetraborate . An expired product is less active.
  • Not maintaining proportions . Add tetraborate drop by drop and mix thoroughly.

You can fix a failed slime in the following ways:

  1. If, when preparing the mixture, glue was used that has lost its properties, then a film mask is used to correct this. It is added to the mass. If it does not begin to thicken, you can add more borax.
  2. If the glue does not thicken even after adding tetraborate, you can add washing gel, starch or lens care liquid instead.
  3. Sometimes it happens that drills add more than the required amount. The glue begins to curl into flakes or the slime becomes very hard. In this case, do the following:
      add more glue;
  4. use a film mask;
  5. add cream or gel to the mixture;
  6. heat or add warm water.

Slime with tetraborate from PVA glue

In this recipe, artificial snow does not need to be previously combined with water for swelling; it is added to the slime in its pure form. Daiso clay can be replaced with light plasticine. But if you don’t use either one or the other, the slime will still turn out unusual and interesting.

Ingredients

  • 60 ml PVA glue,
  • 2 doses of liquid soap,
  • 2-3 drops of liquid paint,
  • 1-2 tsp. artificial snow,
  • 0.5 tsp. diluted sodium tetraborate,
  • 1 small piece of Daiso clay.

How to make

  1. The PVA must be transferred to a mixing cup.

  2. Liquid soap should be added to it.

  3. The components are immediately mixed.

  4. To give the mass a bright color, dye is added.

  5. It needs to be shaken until the shade is even.

  6. Next, artificial snow is poured into the liquid, stirred, and the mixture is allowed to stand for several minutes.

  7. Then an aqueous solution of sodium tetraborate is poured into the base in portions.

  8. The mixture must be stirred with a spoon until it stabilizes.

  9. It is kneaded a little in your hands.

  10. All that remains is to mix the slime with Daiso clay.

Slime recipe without sodium tetraborate

We will need:

  • PVA glue, 65 ml
  • liquid for lenses, 35 ml
  • soda, three pinches
  • water, 125 ml

Pour the required amounts of glue and activator into a bowl-shaped container, which will be liquid for lenses. In the second container, prepare a solution of soda and water. Add one teaspoon of the resulting solution to the adhesive mass. Next, stir all the contents well until the mass begins to move away from the walls of the dish. Let's crush the slime in our palms and make sure it's ready for use. If desired, the slime can be decorated with beads or given color using dye.

Slime with tetraborate from glue stick

With this method, you do not need a microwave or steam bath, but the main component must be kneaded well. Very little activator is required, since there is little glue. Tetraborate can be diluted with water in advance so as not to over-thicken the slime.

Components

  • 15 g glue stick,
  • 1-2 drops of sodium tetraborate,
  • 0.5 tsp. water,
  • 1.5 tsp. shampoo.

Cooking method

  1. The glue stick needs to be released from the packaging and squeezed in your hands until it softens.

  2. Sodium tetraborate is added to this mass.

  3. And you need to knead it again until it lags behind your hands.

  4. Next, water is added to the base.

  5. It also needs to be mixed into the slime.

  6. The last component is shampoo, which is added in 2 doses.

  7. Now the mass needs to be completely kneaded.

Lizun with tetraborate analogue - Naphthyzin

Naphthyzine as a thickener is much weaker than tetraborate, but it still needs to be used carefully and little by little. In this recipe, it is especially important to mix the base well at each stage. Then the slime will be soft, smooth and shiny.

Components

  • 40 ml PVA glue,
  • 2 tsp. water,
  • 0.5 tsp. body lotion,
  • 1 tbsp. l. starch,
  • 6 tbsp. l. shower mousse,
  • 5-6 drops of liquid pigment,
  • 1 pinch of soda,
  • 1-1.5 tsp. Naphthyzin drops.

How to make slime with your own hands

  1. In a clean bowl, combine PVA glue and water.

  2. The next component is body lotion.

  3. It needs to be mixed into the mixture with a spoon.

  4. Then starch is added.

  5. After this, you also need to mix the base with a spatula.

  6. To add airiness, add shower mousse.

  7. After another stirring, you need to pour in the dye.

  8. When the base acquires color, soda is poured into it.

  9. The mass must be stirred again.

  10. Then Naphthyzin is poured into it in portions.

  11. The base must be stirred with a spatula until the glue stabilizes.

  12. At the end, be sure to knead it with your hands to rid the slime of excess moisture.

Festive sparkling glitter slime

This recipe is a worthy addition to the existing interesting ideas for creating slime at home, and the glitter will “refresh” it and save it from mediocrity.

Components:

  • transparent stationery glue (30 ml);
  • colorless liquid soap (30 ml);
  • about 10 drops of sodium tetraborate;
  • water (40 ml);
  • highlighter cosmetic (3-5 g).

Preparation:

  1. Mix glue with soap.
  2. In another container, combine 10 drops of thickener with water.
  3. Mix both solutions, stirring with a spatula. Once the mass begins to thicken, knead it with your fingers.
  4. Add powdered highlighter and mix in.

To extend the period of use, you need to put the substance in a container with an airtight lid so that it does not dry out.

Slime with tetraborate analogue - washing gel

The recipe uses concentrated Persil gel, but Perwoll or Laska are suitable for the same purpose. You will need a lot of activator. Still, it should be poured in little by little, and the base should be thoroughly stirred, first with a spatula and then with your hands.

What do you need

  • 100 ml PVA glue,
  • 1 pinch of powder dye,
  • 6 tbsp. l. shaving foam,
  • 2-3 tbsp. l. Persil liquid washing gel.

Cooking method

  1. The glue is placed in a bowl and dye is immediately added to it.

  2. You need to mix everything so that the color of the future slime appears.

  3. Next, shaving foam is squeezed into the composition.

  4. The base must be mixed again.

  5. Then Persil gel is poured in parts.

  6. Stir the mixture with a spoon until it thickens.

  7. Then it is kneaded manually until it comes away from the skin.

Fantastic neon slime glow

Rainbow Slime is easy to find in the dark, it's fun to play with and kids love it. Glowing in the night, it resembles an alien artifact left by aliens on Earth for people to enjoy.

What do you need:

  • any glue (100 ml);
  • fluorescent powder (available at craft stores).
  • sodium tetraborate (can be replaced with a mixture of flour and starch, shampoo and soda);
  • acrylic or food paint if the powder does not provide a tint.

Cooking process:

  1. Pour glue, dye (if necessary) and fluorescent pigment into the prepared container, mix everything.
  2. Gradually introduce borax drop by drop.
  3. Knead with a spoon, then by hand.

The finished substance can be white or transparent, but a colored specimen looks more interesting. In daylight, the slime made from glue and sodium tetraborate with glowing powder has one shade, and in the night – another.

Slime with tetraborate analogue - liquid for lenses

With this method of making slime, the more homemade foam, the more voluminous the toy will be. Therefore, it is better to use thick shampoo. A liquid glue, like Lucha, will do, but it works. You can also replace PVA with stationery.

What to make from

  • 1 tsp. shampoo,
  • 1 tsp. water,
  • 85 ml PVA glue,
  • 0.5 tsp. acrylic paint,
  • 1 pinch of soda,
  • 1.5-2 tsp. liquids for lenses.

Substances for activating slime

Under their influence, the structure of the components changes, and as a result, the slime acquires the correct consistency, resembling chewing gum. Thickeners come in different forms, the type of which depends on the base of the slime. There are options that are suitable in each specific case.

Borax powder

One of the most common thickeners. It contains sodium tetraborate, which is surrounded by a lot of controversy. Often the basis of borax is a component such as borax. The powder has small granules, so it is easy to work with.

Saline solution

A good activator for slime, under the influence of which elastic mucus is formed. It is easier to buy, unlike other ingredients, since it is easier to find in stores. Saline solution is a liquid for contact lenses and must contain borates. This may be boric acid or sodium tetraborate.

Liquid starch

The composition contains the same sodium tetraborate, which will be common for detergents. It can be found on store shelves next to household chemicals. Allows you to quickly make slime from just three components.

Eye drops or eye wash

Another effective remedy that few people know about. The main ingredient involved in making slime is boric acid.

See also

3 recipes for making slime from regular nail polish

Sprays

Few people know that Teymurov’s foot spray is excellent as a thickener for slime. Of course, it contains boric acid. It is added at the stage of mixing all components. The mass is mixed with each spritz. In this way, they monitor how the structure of the slime changes and whether it is necessary to add more spray. Sometimes 7-10 sprays are enough, and the rubber toy is ready.

Soda

Borax isn't the only thing you need to create hand gum. Baking soda powder does this job just as well. The finished toy, containing soda as a base, has a structure similar to chewing gum.

Gelatin

Using the substance, it is possible to make slime from just two ingredients. In addition to gelatin, you will need plasticine for sculpting various figures. The gelatinous mass is added to soft plasticine in an elastic form. To do this, the granules are filled with water and infused for 45 minutes.

When creating a toy, both components must be warm.

Sugar

Powdered sugar is used for this purpose. You can buy the finished mixture at the store or prepare it yourself. Sugar is crushed using a food processor or manually with a rolling pin. Slime with the addition of granulated sugar is prepared on the basis of liquid soap and mild shampoo. Add 1 tsp to the mixed ingredients. granulated sugar. After mixing thoroughly, the mixture is placed in the freezer for half an hour.

Starch

Dry powder will not work, so a paste mixture is made using water. The mass is mixed with water in equal proportions. The mixture should be viscous, so you won't need a lot of powder. If the slime is made based on starch, it is better to choose shaving foam. Depending on the quality of the starch, a certain amount of foam is added. If the powder is bad, you will have to squeeze out the full bottle.

Borax

The thickener for toy chewing gum can be replaced with Borax. Plastic slime made on the basis of this product turns out to be the most multifunctional. Can be created into any shape, easily comes off surfaces and curls into a ball. The substance is sold in hardware stores. You can also order online or purchase at a pharmacy kiosk.

Hair fixation spray

The component is suitable if a person decides to make slime on his own at home and at the same time inexpensively. For this purpose, hairspray is the best solution. It is ideal to use as it is sold in any store.

The only thing that needs to be taken into account when choosing is to give preference to the option with super-strong fixation.

Air freshener

Making slime using air freshener is a risky business. The product is capricious, since the anti-stress toy does not always take the desired shape. One of the most common mistakes a person makes when trying to make slime for the first time, especially a beginner, is using at least two thickeners at the same time. This approach will not speed up the cooking process, and in most cases you will have to start all over again. Only one thickener is used, no more.

See also

What dyes can you use to paint slime and what color?

Boric acid

The component will help make the ideal anti-stress toy. The recipe is simple and consists of simple ingredients. What you will need:

  • 200 g stationery glue;
  • 100 g PVC glue;
  • 2 tsp. boric acid;
  • shaving foam;
  • food coloring.

Cooking process:

  1. First, two glues and food coloring are mixed.
  2. Next, shaving foam is added. It makes the slime at least 1.5 times larger in volume.
  3. The last component is boric acid for thickening.

When kneading, make sure that the toy does not stick to your hands. If this happens, add a little more boric acid. The slime is kneaded in the same way as usual dough. Food coloring is added exclusively at the first stage. This way the mass will become the desired color or shade. The substance is used in liquid form.

Sodium tetraborate

When none of the listed thickeners are found for various reasons, it is recommended to purchase sodium tetraborate. This solution can be purchased at a pharmacy as it is available without a prescription. Prepared on the basis of water and PVA glue. A quarter of a glass is filled with water and 100 g of glue is dissolved in the liquid. The water must be warm. After mixing the two components, a thickener is added.

The next stage is adding dyes and other small details that will change the structure and appearance of the slime. These could be colorful balloons or something like that. When the mixture is mixed, place it in a cellophane bag and knead it well with your hands.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]