Rating of the best ultrasonic electric brushes

Description

Skylers can be integrated into stationary equipment and connected to other dental instruments.

Can work in two modes: water and normal. Using attachments, you can polish enamel and prepare crowns and orthodontic implants for installation. Skylers are easy to use, intuitive and ergonomic. All hoses and nozzles are easily disconnected and treated with solutions.

Dental scaler is used for:

• eliminating plaque on enamel and gums;
• polishing the enamel after cleaning;
• preparing teeth for filling;
• cleansing the oral cavity from microorganisms;
• cleaning orthodontic structures;
• diagnostics of oral health.

The device operates using oscillatory vibrations without creating discomfort for the patient. The scaler can be combined with any type of dental accessories. All models are equipped with soft ergonomic tips.

The dental scaler gives a certain sound signal if it senses dental plaque in inaccessible places.

Types of scalers

• built-in;
• autonomous.

Autonomous equipment does not require special installation. It operates independently of the fixed dental device. This differs from a built-in scaler, which requires special installation.

Advantages of stand-alone equipment over built-in equipment:

• does not require dismantling when replacing stationary equipment;
• allows the use of additional dental solutions;
• is characterized by mobility and independence from the place of treatment;
• can be combined with any stationary equipment.

However, portable ones have their drawbacks. They require careful observance of storage conditions, and before use they require adjustment.

Skylers without a water mode are of little use for dental offices.

Depending on the technology used, scalers are:

• with magnetostrictive drive;
• piezoceramic;
• air driven;
• with and without backlight.

The most common are air driven scalers. Air-driven devices are cheaper than piezoceramic devices, and the latter are distinguished by high power.

In addition to cleaning enamel and dental pockets from plaque, scalers are used in implantology. With the help of attachments, dentures and implants can be well prepared for installation. Scalers also prepare dental canals for subsequent filling.

Advantages and disadvantages

A dental scaler has the following advantages over conventional dental equipment:

• careful treatment of soft gum tissues in case of accidental touch;
• does not cause mechanical damage to orthodontic structures during cleaning;
• increases the accuracy of medical manipulations;
• independently coordinate the pressure power when working with dental plaque: increase or decrease the load on the tissue.

Flaws:

• pain when clearing deposits in sensitive patients (local anesthesia required);
• damage to gum tissue is possible when cleaning very hard deposits;
• care when cleaning deposits in patients with implants.

There are also contraindications to the use of skylers to cleanse enamel:

• acute heart failure;
• allergy to solutions;
• stationary implants;
• bronchial asthma, breathing problems;
• the presence of foci of inflammation;
• reduced immunity;
• Small children.

The price of scalers depends on the number of functions performed and the country of production.

Principle of operation

The device is developed based on ultrasonic stimulation of tissue, which destroys solid formations. The dentist coordinates the frequency of ultrasound vibrations, selecting the optimal mode. During operation, a liquid is constantly supplied that washes the oral cavity, removes separated plaque and anesthetizes the patient.

It consists of a main unit with a fluid supply coordinator, a power supply, a power pedal, a removable hose with a tip and fluid supply functionality.

The scaler tip easily integrates various attachments and other dental instruments.

Stages of cleaning plaque with a skyler:

1. The nozzle of the device is inserted into the oral cavity, and ultrasonic waves are applied through it. During operation, liquid is constantly supplied to clean the removed deposits. The liquid is removed from the oral cavity using a saliva ejector. Since the nozzle glides over the surface of the enamel, this protects soft and bone tissues from possible injury.
2. After removing plaque, the enamel is polished. This is necessary to remove remaining pieces of hard deposits and clean the surface from uneven surfaces. For polishing, abrasives can be used, as well as the addition of bleaches.
3. After this, fluoridation of the teeth is carried out. This is necessary to strengthen thinned enamel after removing hard deposits and enriching the enamel with mineral elements.

Stages of the procedure

Ultrasonic cleaning is a serious medical procedure and is therefore performed according to an approved protocol. First, the doctor visually examines the patient, determining the degree of contamination of the enamel layer. Then - a mandatory medical history. This allows the doctor to identify possible contraindications. If the patient has hypersensitive enamel, then local anesthesia is given. After this, the cleansing itself begins. The power and other settings of the device are selected by the dentist based on the specific clinical case. The next stage is grinding the ultrasonic-treated teeth using a drill and a special attachment, or manually. In conclusion, the doctor recommends covering the enamel with fluoride varnish to strengthen it and reduce sensitivity.

Note: experts recommend that after ultrasonic removal of tartar, you undergo a professional Air Flow cleaning procedure. This will not only allow you to ideally remove remaining soft deposits, but also make your teeth visually lighter by 1 – 2 shades.

Review of scalers

Models from different manufacturers are available on the market:

• Japanese NCK;
• Swiss EMS;
• German VDW GmBh;
• Chinese Pragmatic and Woodpecker;
• French ACTEON Group.

Woodpecker

Devices from a Chinese manufacturer are distinguished by their low price and great operating comfort.

Three types of nozzles are used for work:

• for oral hygiene, removal of plaque and stone;
• for removing hard deposits and treating carious surfaces;
• for cleaning periodontal pockets from deposits.

Model DTE-D7 LED

This is a self-contained model with optics, equipped with a diaphragm pump to create high pressure. The scaler provides different types of dental procedures:

• removing plaque;
• periodontal therapy;
• endodontic therapy.

The kit includes two fluid reservoirs, 8 nozzles and holders for them. During treatment, solutions of sodium hypochlorite and chlorhexidine can be used.

The model features an ergonomic design, an autonomous water supply system, and autoclavable nozzles with removable tips (with LED backlight). It has compact volumes, light weight, digital control, and a pedal.

Model DTE-D6 LED

A self-contained device made in China, it is lightweight and has an ergonomic design. Six attachments are used to remove plaque from the frontal areas of the crown, as well as to prepare the dental canal of the front teeth for filling. The tip is equipped with LED lighting, there is a reservoir for dental solutions with an autonomous liquid supply.

The kit includes an endochuck with which you can carry out endotherapy. The device is not much inferior to its European analogues, and in some ways it is superior to them. The scaler is easy to clean and disinfect.

NSK Varios 970 LUX LED

This is a self-contained scaler made in Japan, with LED backlighting and optics. The set includes two reservoirs for liquids, three nozzles, and an autonomous water supply. The nozzle tip is equipped with optics and two LEDs.

Piezon 250 LED

The Swiss multifunctional scaler model is characterized by high quality of manipulations and a low noise threshold.

Performed operations:

• removal of dental plaque;
• endodontic manipulations;
• periodontal therapy;
• work with implants.

ULTRA VDW VDW GmBh

This German-made model is designed for endodontic therapy, but also copes with the removal of plaque and tartar. Despite the absence of optics and illumination, the device performs many different manipulations and ensures high quality of treatment.

Built-in skyler DL 920

A distinctive feature is automatic water supply and lighting. The functionality of the device is expanded by the possibility of using numerous attachments. The light ergonomic shape of the scaler does not have a significant impact on the hand, so you can work with the device for a long time. The touch control unit fully controls the operating mode, facilitating manipulations with the patient.

Allows you to eliminate small plaque, hard deposits, deposits stained by drinks and tobacco, and clean small periodontal pockets.

Rating of ultrasonic toothbrushes: popular models

Several manufacturers produce good ultrasonic electric brushes. The most famous are Emmi-dent, Donfeel and Megasonex. Every year, these brands release new and improved models, which are regularly mentioned in brush reviews and are among the top ultrasonic toothbrushes, according to users and dentists.

Each brand of brushes has its own characteristics. For example, Emmi-dent placed an ultrasonic chip directly into the cleaning head of an electric brush. This ensures deeper penetration into the gums and, accordingly, a better therapeutic effect. In this case, the bristles do not move during cleaning.

For brushes produced by Donfeel and Megasonex, the element that produces ultrasound is located in the body. Therefore, ultrasound does not penetrate the gums so deeply, but the brush provides combined cleaning of teeth with ultrasound and movement of the bristles.

Today our rating includes the following models from well-known manufacturers:

• Megasonex;
• Emmi-Dent 6 Platinum Carbo;
• Donfeel HSD-010.

Let's take a closer look at each model to understand what characteristics helped them get into the ranking of the best toothbrushes.

Megasonex - time-tested reliability

This toothbrush was one of the first ultrasonic models. And although dozens of others have appeared since its release, Megasonex continues to firmly hold its place among the best.

The excellent characteristics of the model explain its popularity:

• It operates at a safe therapeutic frequency (96 million pulsations per minute), which does not harm humans, but is destructive to bacteria.
• It operates in three modes that allow you to select the intensity of the impact. Ultrasound without bristle movement, ultrasound with bristle vibrations of 9 and 18 thousand movements per minute.
• A three-minute timer allows you to monitor how long you brush your teeth.
• The set includes two convenient attachments that are easy to change.
• Battery powered.

Emmi-Dent 6 Professional - gentle and effective cleaning

The use of this brush allows you to effectively remove plaque, prevent the formation of tartar, has an antibacterial effect, and a therapeutic effect for bleeding gums and caries. Thanks to its gentle action, Emmi-Dent 6 Professional does not injure the gums and teeth, making cleaning as comfortable as possible:

• Operates on safe ultrasound at a frequency of 96 million pulsations per minute.
• The ultrasonic chip is located under the bristles in the replaceable head, which ensures deeper penetration of ultrasonic vibrations into the tissues of the oral cavity.
• Suitable for cleaning crowns, bridges, dentures, braces.
• There are two cleaning modes - with and without vibration.
• Manufactured in Germany using patented technology, approved by the Russian Dental Association.
• Thanks to the lithium-ion battery, the brush does not need to be recharged for a long time. Can work offline for up to 17 days.

Supplied with a 75 ml tube of Emmi-dent paste. It does not contain abrasive particles that scratch the enamel. In combination with ultrasound, it creates nanobubbles that destroy the membrane of bacteria and effectively clean teeth from complex contaminants, even in hard-to-reach places: enamel microcracks, interdental spaces, and gum pockets.

Donfeel HSD-010 - a high-quality electric brush from a Russian brand

A good model of an electric toothbrush powered by ultrasound, produced by the Russian manufacturer Donfeel. In addition to deep cleaning of teeth, it has a massage effect on the gums. By slightly heating soft tissues, it improves blood circulation, metabolic processes, and helps strengthen blood vessels. Thanks to ultrasound, the beneficial components of toothpaste penetrate deep into the tissue and into hard-to-reach places.

The model has excellent characteristics:

• Works in four modes. Regular, gentle cleansing, whitening and massage. The number of bristle movements per minute depends on the selected mode and ranges from 41 to 38 thousand.
• The charging station is equipped with a special compartment with an ultrasonic lamp for storing and disinfecting attachments.
• A powerful battery ensures reliable operation of the device without recharging for up to one month.
• The set includes three nozzles: one hard and two medium hard.

The models reviewed are the best electric toothbrushes with ultrasonic action. Your dentist will help you choose the model that best suits you.

What to choose?

The problem of choice depends on functionality, quality and price. Let's look at different types of skylers.

Air driven

These devices are the cheapest, but are not very powerful. Installing the skyler is not difficult: the device is mounted on the air hose of a permanent installation.

Built-in

The installation consists of integrating the electrical unit into the doctor's stationary unit. Built-in devices are distinguished by the highest power and are easily placed in a free slot in a stationary installation. Built-in appliances have a large selection of attachments.

With connection to a water source

These models are considered more comfortable and versatile to use than built-in ones. The set of functions depends on the manufacturer; you need to carefully study the instructions.

Autonomous

Ease of transportation from office to office. Removable hoses are easy to detach and wash. Skylers are equipped with an automated control system for mains voltage, supply of solutions, connection of nozzles and hoses, and operating mode. At the slightest problem, the sound warning system turns on; in the event of a breakdown, the device automatically turns off.

Nozzles:

• for removing dental plaque;
• for periodontal curettage;
• for surgical procedures;
• for the treatment of carious lesions;
• for endodontic therapy (endochucks).

When purchasing, you need to open the package and make sure that all components are in place.

Exploitation

In order for the equipment to serve for a long time, careful and competent treatment is necessary.

• Keep the device clean.
• Before each use, the nozzle and key must be sterilized.
• Do not install the attachment while the pedal is on (remove your foot from it).
• Check to see if the liquid is spraying through the nozzle.
• A damaged nozzle must be replaced with a new one.
• It is unacceptable to sharpen a worn-out attachment; it must be replaced.
• When screwing in the nozzle, do not apply any force.
• Control the fluid supply and do not allow it to accumulate between the hose and the nozzle.
• The hose must not be pulled during operation.
• After work, you must first turn off the power and then unplug it from the outlet.
• When attaching an attachment from another manufacturer, make sure that the threads are correct.

Water should flow into the handpiece without interruption, immediately after pressing the foot pedal. If this does not happen, check the attachment of the tip to the hose.

Skyler components must not be boiled in water, sterilized in alcohol or iodine solution, or dried in an oven or microwave. To sterilize parts, you must comply with the requirements specified in the instructions. This will ensure long life of the device.

Various problems may arise when operating devices. They are mainly caused by improper fastening of tips or other parts. The cord may also be damaged or the pedal may be loose. For other problems, please contact your dealer.

Do not install the equipment near flammable objects. Be careful when transporting. It is unacceptable for the skyler to get wet or to be exposed to the directed rays of the sun for a long time.

The autonomous Skyler must be stored in a dry, ventilated room. If you do not use the equipment for a long time, once a month you need to pass water through it and plug it into the network. 5-10 minutes are enough for this.

Warranty service for skylers is provided for a year.

Bottom line

Modern ultrasonic scalers are the latest generation of dental devices that can be used to analyze and monitor the condition of tooth enamel and orthodontic implants. Smart devices themselves detect the accumulation of plaque and send a signal. Using a scaler, you can carry out a high-quality and gentle procedure for removing tartar. The scaler is also used as an irrigator to irrigate the oral cavity during and after treatment.

There are two types of skyler models: stand-alone and built-in. For stationary offices, built-in ones are chosen. However, stand-alone scalers can also be used in your office. They are cheaper and do not require installation.

Sources used:

• Chilikin, V.N. Latest technologies in aesthetic dentistry / V.N. Chilikin. — M.: MEDpress-inform
• Ronkin, Konstantin Modern methods of teeth whitening / Konstantin Ronkin. - M.: Dental Kaleidoscope LP, 2011.
• Official website of the Russian Dental Association

How to preserve the results of dental plaque removal for a long time?

In order for the positive results of cleaning to last for a long time after removing plaque and tartar, you need to learn how to properly care for your teeth. Here are the recommendations that dentists give to their patients:

• Choose and use in dental and oral hygiene the brush and paste that suits you - your type and condition of tooth enamel;
• Brush your teeth at least twice a day - before breakfast and before bed. Try to rinse your mouth after every meal; • Brush your teeth in a circular motion for 3-5 minutes;
• Use rinses and dental floss to remove plaque from interdental spaces and other places in the mouth that are difficult to clean with a regular brush;
• Teeth need to be brushed from all sides, in addition, the tongue and gums need to be cleansed;
• Try to drink coffee and tea less often, and it’s better to quit smoking altogether. It is these habits that contribute to the rapid formation of pigmented plaque.

And of course, don’t forget that professional dental plaque removal is a procedure that should be carried out at least twice a year!