Manufacturers of dental implants: what brands do we work with?

Thanks to the rapid development of such a field of dentistry as implantation, everyone can become the owner of full-fledged dentures that look natural. The choice of designs is large, so it is difficult to figure out which dental implants are better.

Before dental implantation, you need to consult a dentist, because each design has its own characteristics and is not suitable for every patient. Implants can vary in material, shape and size, so your preference alone is not enough to determine your choice. The specialist will offer several options from which you can choose. So that you can do this, let’s look at the features of implants from different manufacturers.

General rating of dental implant characteristics
StraumannAstra TechNobel ReplaceM.I.S.Alpha Bio
ManufacturerSwitzerlandSwedenUSAIsraelIsrael
MaterialAll implants are made from different types of titanium
Survival rate99,7%99,8%99%98%99,2%
DurabilityLifetime Warranty10-15 years
ClassPremiumAverageBudget
Osseointegration period3-4 weeks2-4 months4-6 months
Further prosthetics9 out of 108 out of 107 out of 108 out of 108 out of 10
Availability5 out of 105 out of 106 out of 108 out of 109 out of 10
Overall rating9 out of 109 out of 108 out of 108 out of 106 out of 10

Switzerland is a leader in the production of implants

Swiss-made designs are considered the most expensive and high-quality. Specialists from the world's leading clinics prefer to work with systems from well-known companies such as Straumann and Nobel Biocare. Manufacturers are constantly improving technologies and finding new solutions to reduce the percentage of complications during prosthetics.

The advantages of Swiss implants include:

  • high survival rate;
  • variety of configurations;
  • high quality material;
  • precision manufacturing;
  • aesthetics;
  • use even in difficult cases.

The only significant drawback of these systems is their high price. Installation of such structures is not accessible to everyone. But if there is an opportunity, then the amount spent will be repaid by the long service life and stability of the prosthesis in the bone tissue.

Which implants are better: MIS or Nobel Biocare

As an example, let’s analyze the products of two popular companies: the Israeli MIS and the Swiss Nobel Biocare.

  1. The first is proud not only of a huge range of implants, but also of full compliance of its products with the requirements of the International Dental Association. In addition, the MIS company spares no expense in testing new systems (which has won the sympathy of most dental clinics), and also cares about its consumers, as evidenced by the low prices for quality products.
  2. Nobel Biocare is the most expensive company in the world. She carefully monitors the absence of counterfeits, numbering each implant released. Over the 48 years of its existence, Nobel Biocare has not lost ground and remains a leader in the implantation market, annually receiving an award for the highest rate of implant survival.

US made systems

America stands out in almost all areas, and implantology is no exception. Biohorizon and Bicon products are considered to be US developments. The rest of the American implants were developed by specialists from other countries. Today, the United States owns several of the largest European companies, including the Swedish Astra Tech. This allowed the Americans to take their rightful place in the world market. The systems are also expensive; of course, they are a little more affordable than Swiss ones, but not cheaper than German ones.

Swedish dental implants: features

All products of Swedish manufacturers are based on scientific developments. The corporations that produce them are not only plants and factories, but scientific laboratories and educational sites. Companies pay for long-term and short-term studies on engraftment, and scientific data are published in specialized journals.

Swedish companies hold hundreds of patents related to the production of implants, constantly improving both the individual parts and the design of the posts.

Korea

Koreans offer modern and affordable systems for implantation. This allowed them to take a leading position in sales. Manufacturers Implantium and Osstem have gained worldwide fame. The choice of prosthetic configurations is quite diverse; they are used in different clinical cases. Korean implants are not as versatile as European and American ones.

Like any budget implants, Korean products have their drawbacks. These implants are not suitable for all patients, and the survival rate is high, but inferior to their European counterparts.

In our country, products from Korean manufacturers are popular because they are high quality and affordable.

Price comparison

When discussing the pros and cons of implants, the issue of price always comes up. The cost differences between artificial roots of different brands are quite large.

According to reviews from patients and dentists, Korean implants Osstem, Dentium, and Israeli Alpha Bio, MIS have an attractive balance of price and workmanship.

The most expensive premium dental root substitutes are produced in Europe and the USA. These are the brands Astra Tech, Straumann, Nobel Biocare.

The middle price category is the most extensive, as most manufacturers operate in it. Some of the most popular business class root substitutes are Xive, Ankylos, Impro, Biohorizons, MegaGen.

Israeli dental implants

Another economy class manufacturer is Israel. The MIS and Alpha Bio systems are widely known in Moscow and other regions of our country. They are reliable, easy to install, this option is the best solution for prosthetics of chewing teeth.

The disadvantages include limited application possibilities. The designs are not suitable for all patients; in some cases it is difficult to achieve maximum naturalness and aesthetics.

The price of Israeli implants is affordable for the average Russian, so these systems are used very widely. Practical experience in their use is the best indicator of quality.

Alpfa Bio implants

Alpha Bio implants are produced by the Israeli branch of the world famous Swiss company Nobel. And this already speaks of the seriousness and reliability of this model of implants. All Alfa Bio models are made from titanium alloy with vanadium and aluminum additives. This composition increases strength. There are models for bones of different structures, size ranges with different shapes allow you to select the right pin even in complex clinical cases.

There are options with internal and conical hexagon. The “SLA” surface shortens the healing period and ensures high-quality osseointegration.

Installation of Alpha Bio implants allows you to solve most of the patient’s problems associated with early or forced tooth loss.

What to choose

If your budget allows, Swiss implants will be your best choice. Their survival rate reaches 99%, and the unique design helps restore teeth even in the most difficult cases.

Rating of dental implants by price
Straumann, Astra Tech, Anthogyrfrom 55,000 to 70,000 R
Xive, Nobel, BioHorizonsfrom 40,000 to 50,000 R
Osstem, MIS, Adin, Zimmerfrom 20,000 to 35,000 R
Alpha Bio, Implantium, Nikofrom 10,000 to 20,000 R

If funds are limited, you need to take a closer look at budget implants. Find out from your dentist whether your anatomical features allow you to install a Korean or Israeli system. If so, why not opt ​​for them. If budget systems do not allow high-quality restoration of the dentition in a particular case, then there is no alternative; you will have to choose the most expensive designs.

If you decide to place an implant, rely on the professionalism of a specialist. In some cases, you will be offered several options. If you cannot choose, ask your doctor about the features of the proposed systems and experience in using them.

Implantation is a surgical procedure, the recovery period after which is quite long. We must do everything possible for a favorable outcome. Do not rush to install an unknown system in a random clinic that has low prices. A high-quality implant installed by an experienced doctor will last for many years.

Average cost implants

Dental designs in the mid-price segment are inferior to premium ones in some respects. These are high-quality implants that take root well in the gums. Their use rarely causes complications. Prosthetics using them is cheaper. The cost of mid-price implants is 25-35 thousand rubles.

This category includes:

  • Oraltronics
    (Germany). German titanium implants with double FBR coating. They are characterized by fast and good survival rate and high primary stability. This allows you to speed up implantation, reducing the time between prosthetic stages. They have almost no contraindications; the bone settles minimally during implantation.
  • SuperLine
    (South Korea, USA). The Dentium brand is from South Korea, and the system is developed at facilities in the USA. Installation of SuperLine implants is characterized by minimal trauma and rapid survival. Thanks to the special design of the double threaded rod, it is suitable for use in clinically difficult cases. Forms a single system with bone tissue. The model range includes both standard implants and products for one-stage implantation.
  • Anyridge
    (South Korea). The systems of this brand are distinguished by simple and low-traumatic installation for the patient. With their help, you can carry out prosthetics even immediately after tooth extraction. They have practically no contraindications; they can be installed in dense and loose bone tissue, with a narrow bone or lack of height. The rod takes root quickly and is highly stable. The surface of the rod is coated with calcium ions, which accelerates healing.
  • ROOTT
    (Switzerland). Implants for one-stage installation. They are used when two or more teeth are missing in the dentition. The procedure is performed under local anesthesia in one visit to the doctor. The rehabilitation period is about 3 weeks. The main advantage of this system is the absence of contraindications. It can be installed for any condition of bone tissue, for periodontal diseases.
  • Bicon
    (USA). Bicon systems use a screwless connection. The abutment can be positioned 360 degrees. This makes the system one of the best in its segment. The procedure is minimally invasive. The rod takes root quickly and well, forming a single system with the bone tissue.
  • BioHorizons
    (USA). Suitable for use in difficult cases - with loose bone tissue, in conditions of limited interdental space, etc. The shape, which follows the root of the tooth, facilitates installation and allows the use of implants even immediately after removal.

Bicon Implants Review

How important is the manufacturer of a dental implant and its reputation?

Try to pay close attention to the choice of implant manufacturer. Ultimately, the quality of the products depends on his integrity.

Clinical sites and training centers

The official representative of the company must have its own clinical base and service center in the country where it supplies its models and components. It is also desirable that technical support and training of doctors be provided. Specialists should have the opportunity to gain new knowledge regarding manufactured models, exchange experience with foreign colleagues, and undergo certification.

For example, in order to have the right to use a brand like Biomed in his work, it will not be enough for a doctor to take courses; he will need to visit Europe more than once. After all, the manufacturer insists on going through a multi-stage training system and cares about its reputation. The doctor should not have the right to make mistakes, so he will not receive a certificate until he has honed his skill level so much that the company can trust him.

Good to know! Companies that have earned great trust from patients and doctors in the implantation industry spare no expense in researching and improving their products. They publish materials on their official websites, as, for example, Nobel does . Please note that a company that sells truly high-quality products must have an impressive track record. If it exists for only a few or even ten years, then it is too early to talk about any lifelong operation - there is simply no evidence for this.

Software and proprietary implantation techniques

Among other things, the manufacturer must have computer programs that help specialists approach the planning stage of the implantation procedure more carefully and eliminate any risks and errors. For example, Nobel has software - NobelClinician, NobelGuide, Straumann has Exocad.

Also, some companies, together with the implant models they produce, are developing their own complexes that help patients around the world solve the problem of edentia quickly and at a favorable cost. A striking example of this is again Nobel with all-on-3 or all-on-4 implantation complexes, and its direct competitor Straumann with solutions on 4-6 Pro Arch implants is not far behind.

Beam prosthesis from RUB 170,000!

Preparation of the oral cavity, individual bar with installation, taking impressions, manufacturing, installation and fitting of dentures. The price is for 1 jaw. Lifetime guarantee! Consultation with a doctor is free! Call now: +7 (495) 215-52-31


It is also important that manufacturing companies provide a full range of materials for implantation - active membranes and bone substitutes, tools for installing implants, different models for certain clinical cases and, of course, abutments for all occasions. Only then will it be possible to use one system to solve certain clinical problems, obtaining the most worthy and durable result.

According to the official website of the company nobelbiocare.com

Rating of the best implants - TOP 10 models

If you are deciding which dental implants are best to choose in terms of quality and successful experience in practice (and not just price), then the rating will be distributed as follows - see the table:

Brand/companyLevel of marginal bone subsidenceSurface FeaturesSurvival rate
Nobel BiocareThere is no resorption in the first 5 years, but in 10 years the level decreases by 0.3 mmHydrophilic TiUnit active surface coated with phosphorus ionsUp to 99.3% (10 year perspective)
StraumannSubsidence of 0.45 mm over 5 yearsSLActive surface with hydrophilic properties97-99.2% (10 years)
Astra TechMaximum subsidence over 5 years is about 0.3 mmActive hydrophilic OsseoSpeed ​​surface with fluoride ions.94-100% (10 years)
AnkylosUp to 0.6 mm in 3 yearsVolumetric surface with a large number of micropores FRIADENT Plus94-100% (8 years)
XiVENo data available95-99% (5 years)
M.I.S.0.7 mm in 1 yearSLA – rough and microporous surface97.3% (5 years)
Alpha BioNo data availableMicroporous coating NanoTec98.3% (5 years)
OsstemUp to 0.8 mm in 5 yearsSurface with hydrophilic properties96-98% (5 years)
ImplantiumOn average, resorption is 0.45 mm over 1 yearClassic SLA surface (rough)98% (5 years)
BiomedNo data availableFor solid ones - smooth with antimicrobial coating96-98% (5 years)
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]