Restoration of pulpless teeth using Unimetric pins

1060

The preserved tooth root and the destroyed coronal part leave the dentist with not a large choice of treatment techniques.

Root removal, tooth restoration using a core tab, the use of flexible reinforcing tapes glued into the tooth canal, and installation of an intracanal pin.

The last treatment method is the most popular.

General presentation and purpose

The pharmaceutical market offers a huge number of intracanal pins of different materials and designs. Unimetric products from the Swiss company Maillefer are known to endodontists around the world.

The company was founded in 1889, and is named after its founder, August Maillefer. In 1995 it became part of the Dentsply International corporation. Registered in ISO 9001 and EH 46001 and certified as a European manufacturer.

Along with Unimetric products, the company produces fiberglass pins EasyPost, EasyPostLux, plastic ashless Uniclip, titanium and steel Radix-Anker.

Unimetric pins are designed for installation in a tooth canal for the purpose of restoring the coronal part of pulpless teeth.

They are a conical rod with a helical relief on the outer surface and a rectangular head with an end key groove.

Main characteristics

If we consider the characteristics of the product from the point of view of a specialist, the main points are:

• Material. Very durable, lightweight titanium, which is fully biocompatible with the human body, non-toxic and chemically resistant to biological fluids.
  The modulus of elasticity is lower than that of steel, but higher than that of gold.

  The disadvantages of titanium pins include low radiopacity and relatively high cost. (The Unimetric 0.8 model is available not only in titanium, but also in stainless steel).

• Shape : conical.
• Type of fastening in the tooth canal - passive, anchor (fixed with cement).
• The head is square, in two length variations (s – short and l – long).
• The marking is colored in the form of multi-colored circles.
• The number of uses is one-time (Post).
  Reuse is not recommended, although it is technically possible. And if in case of emergency you have to resort to this, it is necessary to pay increased attention to the disinfection of the pin in order to avoid infection of the oral cavity.

What is a tooth contact point and the importance of its restoration.

Read here about the design features of Glassix pins.

At this address https://www.vash-dentist.ru/krasota-i-uxod/narashhivanie/shtiftyi/guttaperchevyie-kornevoe-plombirovanie.html we’ll talk about the pros and cons of gutta-percha points.

Advantages and disadvantages

Titanium pins have a number of advantages compared to products made from other materials. Among the main ones are the following:

• Minimum weight. Thanks to this, very little pressure is applied to the tooth and it is possible to partially get rid of the discomfort.
• Strength. Due to the fact that the design has increased strength, patients can save not only time, but also money.
• Compatibility. It has been scientifically proven that titanium products are highly compatible with root canal tissues, and accordingly the risk of allergic reactions and toxic substances is minimized.
• protection . Thanks to this, it will not only extend the life of the structure, but also reduce the risk of all kinds of complications.
• Reaction with other materials is excluded.
• Possibility of installation on the most damaged tooth, but only on the condition that the roots have already been extracted.
• The shape and functionality of the damaged tooth is restored.
• Long life . With proper care of the structure, it can last more than ten years.
• The tension in the canals is distributed evenly, due to which minimal stress is placed on the root canals and gums.
• It is possible to avoid extraction and even restore its functionality.
• Relatively low price.
• The ability to choose the most suitable design in each individual case.
• Possibility of correcting the aesthetic appearance of a pathological bite.

Set overview

Unimetric pins are available in two sizes – Unimetric 0.8 and Unimetric 1.0. They are supplied in the form of sets containing, in addition to the titanium rods themselves, tools for processing canals (drills) and keys for their installation.

Unimetric pin sizes

The set includes tools for processing canals and installing pins.

• Expansion drill. Used for the initial passage of channels.
• Calibration drill. It has a size that exactly matches the diameter of the pin, and is used to pass the channel before directly installing the sterlet.
• Pre-calibration drill. Intermediate processing tool, used after channel expansion before calibration.
• Key.
• Stand for pins.

Drill color coding

Indications and contraindications

The use of Unimetric pins is recommended in cases where a large part of the tooth crown is lost, and the dentist is faced with a dilemma - to remove or save the tooth.

The most common uses of pins:

• the outer crown is completely or partially destroyed;
• the tooth is fractured, but most of its root is preserved and can perform its function.

Contraindications

There are no specific contraindications for the use of Unimetric products. There are general contraindications for pin systems, in which their use is inappropriate:

• degree III tooth mobility;
• curved, difficult-to-pass root canals;
• chronic or acute inflammation in the periodontium, the presence of cysts, granulomas, fistulas;
• teeth with root apex resection;
• thin canal walls (less than 2 mm);
• roots whose length is less than the height of the crown;
• systemic diseases - diabetes mellitus, hematopoietic disorders, damage to the nervous system and some others.

Other unforeseen circumstances may arise that will make installation of a Unimetric pin impossible. In any case, the endodontist has the final say.

Stages of staging

Installation of Unimetric in a pulpless canal involves the sequential performance of a number of operations, starting from the preparation of the tooth canals to the formation of the crown stump:

• Removing old filling material or pin from the canal. If the canal was filled with gutta-percha, it is first dissolved with a solvent or a heated plugger.
• Selecting the pin of the required size. It is performed using an x-ray of the tooth.
  The length of the rod must be at least 2/3 of the length of the canal, provided that its head is at the level of the bottom of the pulpous cavity. A long or short head is selected depending on the coronal reconstruction plan.
• Selection of expansion drill. The tool is selected by color marking.
• Expansion of the canal using a drill and expansion drill.
  The speed of the tools should be kept low - 800-1200 rpm. It is advisable to use thrust rings on the drill that limit the depth of penetration of the drill. The penetration depth should be 3-4 mm greater than the length of the pin. This is necessary to prevent overstress in the apical part of the canal, which can occur if the tip of the titanium rod rests on the bottom of the canal.
• Determining the channel depth with a probe. If several pins are installed (in a multi-channel tooth), you need to check whether they interfere with each other during installation.
  If the apex of the tooth root was shortened during previous treatments, the pin will also have to be shortened. At the same time, for high-quality tooth restoration, it is necessary that the ratio of the length of the rod to the height of the head be at least 2:1.
• Passing the channel with a calibration drill.
• Disinfection with antiseptic and drying.
• Filling the cavity with cement (phosphate, glass ionomer, polycarboxylate) using Lentulo channel filler.
• Inserting the pin with tweezers or a wrench without screwing it in.
  In order for the cement to fill the screw thread, it is advisable to rock the rod a little without weakening the axial pressure. Its tip should not reach the bottom of the canal. Excess cement is then used for the initial formation of the tooth stump or, after hardening, is removed with a trowel.

The final operation to restore a tooth is to form a tooth stump using a composite material and cover it with a light-curing microhybrid composite or an artificial crown made of plastic, porcelain, metal-ceramic or metal.

When restoring chewing teeth, it is recommended to install metal-plastic or metal-ceramic crowns.

Features of parapulp pins and technique for their placement.

In this post, we will discuss the lifespan of an anchor pin in a tooth.

Follow the link https://www.vash-dentist.ru/krasota-i-uxod/narashhivanie/shtiftyi/steklovolokonnyiy-v-stomatologii.html if you are interested in reviews about fiberglass pins in dentistry.

Care

In the postoperative period, which can last up to several months, the patient must adhere to a number of recommendations. Thanks to this, he will be able to protect the pin prosthesis from damage and avoid unwanted complications.

Why can our articles be trusted?

We make health information clear, accessible and relevant.

• All articles are checked by practicing doctors.

• We take scientific literature and the latest research as a basis.

• We publish detailed articles that answer all questions.

Among the most important of them, experts highlight the following:

• During the first few days, rinse your mouth with antiseptic agents.
• In the evening, clean your teeth from food debris and plaque using dental floss.
• In the first few weeks after installation, exclude from the diet foods that require excessive jaw activity. The food should be fairly soft, and ideally ground.
• On the first day after surgery, avoid cleaning the oral cavity, and then carry out all necessary hygiene procedures twice a day.
• Avoid contact of teeth with anything that can lead to damage to their integrity (toothpicks, nuts, seeds).
• your dentist regularly (at least once every six months) and strictly follow all recommendations given by him.

The hardening process of the extended tooth lasts several days. During this period, it is extremely important to avoid the consumption of strong tea, coffee, as well as foods and drinks that contain natural or synthetic dyes.

Expected result and service life

A tooth restored with a pin is no different in appearance from a tooth without it. Service life depends on many factors. First of all, it depends on the initial condition of the tooth - how much the crown part was destroyed, what condition the root was in, how thick its walls were.

If the condition of the periodontium and the root of the tooth was good, that is, the root was preserved along its entire length, had walls more than 2 mm thick, and was restored using the correct technology, then the restored tooth can last 10 years or more.

The service life of a tooth with a weakened root (thin walls, with the apical part removed), a heavily damaged crown part, and no elevation above the gum, may be limited to several years.

Price

Unimetric pins are sold in sets, which, along with the main products, include a tool for canal preparation.

Standard set Unimetric 0.8 includes:

• Pins 008S – 25 pcs., 108S – 25 pcs., 108L – 25 pcs., 210S – 20 pcs., 208L – 20 pcs., 308S – 15 pcs., 308L – 15 pcs.;
• penetration drills – 4 pcs. for pins No. 008, 108, 208, 308;
• calibration drills – 4 pcs. for Nos. 008, 108, 208, 308;

• screwdriver key – 3 pcs.

Unimetric 1.0 set contains:

• pins 110S – 25 pcs., 110L – 25 pcs., 210S – 20 pcs., 210L – 20 pcs., 310S – 15 pcs., 310L – 15 pcs.;
• penetration drills – 3 pcs. for products No. 110, 210, 310;
• calibration drills – 2 pcs. for No. 110, 310;
• screwdriver key – 3 pcs.

Such sets cost from 8,000 to 10,000 rubles, depending on the specific store.

You can purchase one pins without tools, 25 pcs. in a set at a price of 500 rubles.

The same set, but with a tool, will cost the buyer from 3,500 rubles.

Unimetric installation cost

The most common cost for installing Unimetric fonts ranges from 1200-1500 rubles. With some effort, you can find more affordable prices in the provinces.

Titanium pin: design and shape

In the anatomical restoration of a tooth, the condition of the periodontium, the characteristics of the roots, the degree of destruction of the crown, and the degree of load at the contact of the upper and lower jaws are taken into account. Therefore, the characteristics of titanium pins will differ depending on the clinical situation.

The full classification of dental rods is presented in the table.

Reviews

Although most endodontists today prefer to use polymer intracanal rods to restore teeth, the classic of endodontics - titanium pins - do not lose their position.

The positive qualities they possess support the demand for lightweight, durable and body-safe devices.

If you have had the opportunity to restore teeth using titanium pins, share your impressions of their performance properties by leaving your review at the bottom of the page.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags: teeth extensions pins

Did you like the article? stay tuned

Previous article

A metal tab is a reliable chance to preserve the functionality of a damaged tooth

Next article

TMJ joint splint for TMJ pain relief

Advantages and disadvantages of titanium pins

The technique of restoring teeth using titanium pins has been proven for decades. It has been used all over the world for more than 25 years. And during this time, titanium has only confirmed its exceptional medical properties. Compared to other metals and alloys, titanium rods have many advantages:

• Affordable cost of restoration work.
• Long service life. There are many examples where pins protect a tooth for more than 20 years.
• Structural reliability. Titanium pins have increased strength, which ensures an almost unlimited service life.
• Corrosion resistance. The metal does not oxidize, does not enter into chemical reactions with food, saliva, and does not interact with other materials (fillings, dentures).
• Possibility of installation for patients suffering from severe forms of allergies.
• A large number of standard sizes and the possibility of individual production of titanium pins allows you to restore even a severely damaged tooth, right down to the gums, provided there is a “living” root with sufficient volume.
• Returns the crown's aesthetic appeal and functionality, without radical prosthetic methods (pulling out, followed by installation of a removable or fixed bridge).
• 100% osseointegration. A strong functional connection is established between the titanium pin and the bone tissue, which prevents bone resorption or its critical deformation.

Titanium pins allow you to restore a tooth while fully preserving its natural appearance and functionality. Due to radiopacity, biomechanical compatibility with dentin tissues, low wedging load, titanium and its alloys remain the best material in restorative dentistry.

The disadvantages of titanium retainers are conditional, but they should still be taken into account when choosing a restoration technique. In case of the slightest violation of restoration technology, the risk of developing caries increases by 80%. Installing a pin is an irreversible procedure. Replacing the rod is impossible; the tooth is removed. Over time, the root walls become thinner and additional filling will be required.