Ultrasonic bath for dentures: review, features and types

Cleaning dentures is an integral part of dental hygiene. It allows you to avoid specific deposits and remove dirt from the surface of the prosthesis. In addition, proper cleaning produces disinfection, which avoids inflammation and infection. Traditional methods require a lot of effort and time. In case of severe contamination, it is necessary to resort to additional, not always harmless to human health, means. An ultrasonic bath for cleaning dentures is an excellent alternative.

You need to get used to a new prosthesis, and at first it causes discomfort, especially during sleep. Getting used to it happens faster when you constantly wear a prosthesis, and therefore dentists do not recommend removing it at night, especially since many people experience displacement of the articular heads on the jaw bones during sleep. And yet, most people prefer to sleep without dentures, so that nothing interferes with normal rest.

How to store a removed denture? First of all, you need to clean it very well with a brush and rinse it in boiled water. Then a disinfectant solution is poured into a glass and the prosthesis is lowered into it, where it remains until the morning. The product must be completely covered with the solution, otherwise microorganisms may remain on the parts protruding from the liquid. The same solution cannot be used twice for hygienic reasons.

Description of the device

The main operating principle of the bath is the use of high-frequency oscillations, which have a comprehensive effect on contaminants using the cavitation method. With the help of such vibrations, harmful microorganisms are eliminated by ultrasound. When using such devices, you do not need to worry about the condition of the prostheses. Cleaning involves the use of distilled water or absolutely harmless, natural solutions. Thus, we can say with confidence that this type of denture cleaning will not affect human health in any way.

At first impression, it seems that using an ultrasonic bath for dentures is absolutely simple, but there are certain nuances here too. They mainly concern the choice of the device itself and setting up the equipment for specific purposes. The characteristics of the device when purchasing should play an important role. Particular attention should be paid to ensure that cleaning occurs as efficiently as possible, and that the structure of the dentures itself is not damaged. It should be borne in mind that the materials used to create prostheses are quite fragile, especially metal ceramics and acrylic plastic. In such options, it is better to provide gentle processing modes.

To get the maximum effect from the ultrasonic cleansing process, you must follow these tips:

The bath must be filled with clean water.
The denture must be completely covered with the solution or water.
The standard cleaning procedure time is five minutes. If more thorough processing is necessary, the time is extended.
After the bath has cleaned the denture, any remaining plaque can be removed with a soft brush.
After finishing work, the device must be wiped with a dry and clean cloth.

What types of ultrasonic baths are there for dentures?

Pro'sKit SS-803F – environmentally friendly cleaning

An environmental cleaning device for removing residues of mineral oil and polishing substances. Effectively removes oil and fat deposits, rosin residues and other flux from the surface of the printed circuit board.

The action of the device is based on the effect of high frequency waves on the surface being cleaned. The bath is used in a scientific laboratory, dental clinic or medical facility.

Recommended for use in jewelry workshops, purchases and pawn shops. The design provides microprocessor control of the thermostat. Processing time can reach one and a half hours.

Pros:

High frequency ultrasound, environmentally friendly cleaning process.
Processing of dentures, brushes, combs, glasses.
Five processing modes.

Minuses:

Only positive reviews.

Geosoft

The manufacturer claims a device that is capable of disinfection and pre-sterilization cleaning of prostheses and instruments. For this purpose, it is proposed to use a special solution that will clean surfaces under the influence of ultrasound. The bath can hold 150 ml, while the solution requires from 50 to 100 ml per use. The ultrasonic bath is equipped with a timer for three minutes. The average cost of the device is about 12 thousand rubles.

Classification of contraindications

Practice shows that the effect of ultrasonic waves on the dentition, as a rule, does not cause patients discomfort or pain. Medical restrictions provided for the procedure are divided into two categories: relative and absolute contraindications. The difference between them is that with the factors of the first group, the patient can buy ultrasonic teeth cleaning immediately after eliminating the problem, while the presence of the second excludes the possibility of prescribing the procedure.

The list of relative contraindications includes:

The presence of viral and infectious pathologies transmitted by the respiratory route;
Exacerbation of chronic diabetes mellitus;
Inflammatory foci localized on the mucous surface of the oral tissues;
Diagnosed neoplasms, including cystic and other forms of pathologies;
Diseases of teeth, gum tissue and periodontal disease requiring additional treatment;
Extensive erosion of tooth enamel, as well as the presence of ulcerative lesions;
Previously prescribed therapeutic course, including taking immunosuppressants and corticosteroid medications;
Pregnancy and lactation, during which it is recommended to limit medical influence on the body.

The category of absolute contraindications, requiring the selection of an alternative technique, combines the following factors:

The presence of an electronic cardiac stimulator in the patient’s body;
Identification of serious pathologies affecting cardiac activity, including arrhythmia;
Complicated forms of tuberculosis and hepatitis pathologies;
Diagnosis of complex diseases associated with a risk to life;
HIV, AIDS, as well as other diseases classified as sexually transmitted;
Problems with respiratory function, including asthmatic manifestations;
Oncology, epileptic seizures and other dangerous pathologies.

In addition, the procedure is prescribed only to patients with a fully formed permanent dentition, which makes it impossible to provide the service in childhood and adolescence.

Euronda

This manufacturer offers a wide selection of devices with increased frequency of ultrasonic exposure. This facilitates deeper and more thorough cleaning of dentures, as well as pre-sterilization procedures and disinfection of dentist’s instruments.

The dimensions of the ultrasonic baths from this manufacturer are quite compact; they are equipped with a stainless steel tank. The timer is set to 10 minutes. The design of the bathtub of this brand is equipped with a piezoceramic transducer with a power of 40 W. The undoubted advantages of this device are:

High quality materials.
Automated control.
Tools to be cleaned can be placed directly on the bottom of the tank.

Euronda costs from 18,500 rubles.

Why do you need care?

In short, caring for removable orthopedic structures is necessary so that they maintain an attractive appearance and functionality. And also so that a person can communicate with others without hesitation, without worrying about bad breath. High-quality care is required to maintain normal microflora in the oral cavity, i.e. so that harmful microorganisms do not prevail over neutral and beneficial ones. Timely removal of soft and hard plaque also eliminates a potential source of infection, because they are inhabited by a large number of pathogenic bacteria. That is, adequate care protects against inflammation in the oral cavity and infections. And what will happen in his absence, we will tell further.

Soltec SRL

Suitable for pre-sterilization cleaning of dentures. The device operates on the innovative Sweep system, which uses ultrasonic waves of three frequencies. This cleaning method allows you to achieve maximum results.

The device has a membrane control panel and an electronic timer designed for a 15-minute operating cycle. Heating occurs up to 60 degrees. The cost of an ultrasonic bath for cleaning dentures from this manufacturer is an order of magnitude higher than previous options - 56 thousand rubles.

Skymen JP-008 – touch control

Design for cleaning various products through dynamic vibrations in a liquid environment at ultrasonic frequencies. Designed for operations with jewelry of various metals and configurations.

Works with manicure cutters, files, and is used to remove drops of rosin and other flux from radio and electronic circuit boards. It is possible to clean dentures and wristwatches.

It is equipped with a special plastic grid to isolate the loaded item from the main body of the bathtub.

Pros:

Convenient, unobtrusive control via touch buttons is quite unexpected.
It removes plaque from dentures in one or two minutes, no toothbrush is needed.
Very nicely made, reminiscent of a medical autoclave.

Minuses:

There is no provision for fixing the lid; it rattles terribly during operation.
The description does not correspond to the declared data: the frequency is 40 hertz, instead of 42 and only 15 minutes, instead of 30.

Medical

The manufacturer offers baths for pre-sterilization treatment and cleaning of dentures and dental instruments. The main feature of the device from this company is the frequency modulation mode. In this way, cleaning can take place in the most optimal way. Pathogenic microorganisms must be eliminated even in the hidden and internal cavities of the denture.

The price of ultrasonic baths is of interest to many. We'll look into it.

The device is equipped with a timer and provides temperature regulation. The body is made using stainless steel, which makes it resistant to rust and fungus. The display shows the remaining cleaning time. The device is well equipped. The cost is approximately 44 thousand rubles.

Rules for caring for dentures

Rinsing the denture after eating. It is necessary to clean the denture with running water from the slightest food residue. When carrying out this procedure, it is extremely important not to drop the structure from your hands, which can lead to damage.
It is equally important to tidy up the oral cavity after removing the denture. “Native” teeth can be cleaned with a soft-bristled toothbrush with toothpaste applied; if teeth are removed, a gauze swab will do.
In addition to cleaning after meals, the denture should be thoroughly cleaned at least once a day. Simply washing with water is not enough: the device must be removed and treated with either a low-abrasive paste, or liquid soap or dish soap, if there are no other options. You can only use a soft brush, as other types can damage the prosthesis.
When carrying out the procedure, extreme care must be taken, namely: do not bend the plastic parts and do not deform the hooks.
Most dentists recommend not removing the prosthesis for 24 hours during the first 2-3 weeks after installation. However, subsequently the product must be removed for at least 6 hours to allow the tissue of the bed to rest. Contrary to popular belief, it is not at all necessary to keep dentures in a glass of water; a special container for dentures or any suitable box will do. Keep in mind that dentures are a desirable toy for pets. We often have to redo chewed dentures.

Elma

Specializes in cleaning instruments of even the most complex configurations. Effectively disinfects and cleans dentures without the use of potent agents. The device comes with an ultrasonic generator. The device uses environmentally friendly technologies. The parts and components of the ultrasonic bath for cleaning dentures are produced without dismantling.

High cleaning efficiency is achieved through a high-performance ultrasound transducer. The unique technology allows ultrasound waves to be evenly distributed in the solution. The price of the device reaches 22 thousand rubles.

The best ways to preserve and maintain smile aesthetics

What is the best way to clean removable dentures? If they are very dirty, or there are stone build-ups, then the only possible way to whiten is to go to the dentist for hardware cleaning. But even here it is not always possible to return restorations to their original shade. To prevent loss of aesthetics, it is necessary to regularly clean artificial teeth at home - with a special brush, paste, and disinfectant solutions. The dentist will advise which product is best to use at home after prosthetics. It is also recommended to treat brightly colored foods and drinks without fanaticism, to give up cigarettes or reduce their quantity - in any of the above situations, oral hygiene should be strengthened.

"Ferroplast Medical"

The device comes in different capacities, the largest is 27 liters, and is equipped with a heater. The device is suitable for pre-sterilization treatment of dental instruments and dentures. Capable of cleaning contaminants of various origins, including mechanical, biological and medicinal. Suitable for disinfecting metal and glass instruments.

Inside the tank there is a metal grid for tools. The body is made of stainless steel. The price of the device reaches 37 thousand rubles.