Teeth whitening strips Crest 3d white

From this article you will learn:

whitening strips – reviews, before and after photos,
differences between Crest and Blendamed strips,
price of strips in a pharmacy for 2022.

The article was written by a dentist with more than 19 years of experience.

Whitening strips are designed for chemical teeth whitening at home. The whitening effect is achieved due to hydrogen peroxide, which is applied in the form of a gel to the inner surface of the strips. Their advantages include ease of use, good effectiveness, and a much more affordable price compared to whitening at the dentist.

In Russia, the most well-represented strips for teeth whitening are produced under the brands “Crest 3D White” and “Blendamed 3D White Luxe”. This creates the illusion of choice, but in fact both brands are owned by the same (USA). Compared to Blendamed strips, Crest strips have a higher concentration of hydrogen peroxide.

Teeth whitening strips Crest 3D White and Blendamed 3D White Luxe are good marketing products. You don't have to go to the dentist. It is much cheaper than in the clinic. But why then are the reviews of a fairly large part of patients on teeth whitening strips still far from enthusiastic? In this article we will talk not only about the undoubted advantages of their use, but also the problems that you may encounter.

How do teeth whitening strips work?

Most home teeth whitening systems contain hydrogen peroxide or carbamide peroxide as an active ingredient. Different types of Crest 3D White strips contain different concentrations of hydrogen peroxide - from 9.5 to 14% (we will discuss each type of Crest strips in detail below), and Blendamed 3D White Luxe whitening strips contain 5.25% hydrogen peroxide.

Solutions of hydrogen peroxide and carbamide peroxide are capable of penetrating deeply into tooth tissue with prolonged exposure - to the entire thickness of enamel and dentin. Having penetrated inside, these peroxide compounds decompose there to form free radicals (active oxygen). It is free radicals that lead to the destruction of molecules of chromogenic substances, which give teeth pigmentation.

However, free radicals are not stable compounds and quickly decompose. Therefore, to obtain a whitening effect, hydrogen peroxide must be in contact with the teeth for a sufficiently long time, and it is also necessary to maintain a sufficient concentration. The lower the concentration of hydrogen peroxide in the strips, the longer they will have to be used to get the desired effect.

Whitening strips Crest 3D White –

Crest strips for teeth whitening (Crest 3D White) - available in 6 different versions. They differ in different concentrations of hydrogen peroxide, the number of strips in the package, and the exposure time of the strips on the teeth. One of the strip options even has a special light source, which apparently should give the consumer the illusion that this product is similar to professional “laser” whitening systems.

But what's really important is that different types of strips hold onto the teeth differently. Some of them can slip on the teeth and do not stick well. When choosing Crest strips, pay attention to the fact that they contain Advanced Seal® technology (allows the strips to adhere firmly to the teeth and not slip on them). Otherwise, the strips will peel off and there will be no close contact of the whitening gel with the enamel surface.

If you have an uneven dentition/crowded teeth, or a pronounced inclination of some teeth, the FlexFit® technology will allow you to achieve good adaptation of the strips to the surfaces of all teeth. In this case, the strips will be slightly elastic (stretch), which will allow them to better adapt to uneven tooth surfaces or uneven dentition shapes. Only Crest 3D White “Supreme FlexFit” strips have this technology. If the strips do not adhere tightly to some surfaces, then the teeth in these areas will remain dark.

Crest WhiteStrips Made in the USA

The high level of quality of all products in the Crest 3D WhiteStrips series is ensured by compliance with modern technologies and high standards, so teeth can be whitened gently and professionally. The manufacturer of the series is a company from the USA, where it is simply impossible not to follow high requirements and standards. At the same time, the manufacturer’s assortment includes several 3D White subseries, each of which is designed for whitening teeth with plaque of varying degrees of complexity.

White Strips are manufactured using excellent quality components and their composition is safe. This provides whitening of 1-2 tones or even 6-7 tones. The manufacturer takes into account the needs of all categories of its customers, so people who have very heavy plaque on their enamel, and those with sensitive teeth, for whom pain does not allow them to use any means when performing whitening, will be able to choose suitable strips.

US dentists recommend any Crest brand strips. Their quality is guaranteed by the use of modern technologies during production. Each system is universal, since their shape is the result of modern developments and follows the shape of the teeth.

Whitening strips: reviews

Let’s say right away that the Crest 3D White “Vivid” strips and especially the Blendamed 3D White Luxe will receive the least good reviews. These versions of the strips do not hold onto the teeth well enough, they slide over them, and if salivation is quite active, it will not be possible to fix them well on the teeth at all, as a result of which there will be no necessary tight contact of the whitening gel with the enamel.

The reviews for White Light teeth whitening are satisfactory. In professional whitening techniques, light sources are used to accelerate the breakdown of hydrogen peroxide in the whitening gel into free radicals, and exposure to light is carried out not after, but during the procedure. In Crest 3D White “With Light” strips, the light is used for 10 minutes after the end of the procedure and, thus, it is not intended to activate the whitening gel.

The portable White Light lamp does not have its own whitening effect, because it is a source of light waves in the “blue” range, and only light waves in the ultraviolet range have a slight whitening effect. Therefore, we believe that the light source in these strips is purely a marketing ploy to make this procedure look like professional laser whitening. This allows us to sell 10 sets of Crest White Light strips - at the price of 20-40 sets of similar sets.

Which Crest strips are better –

We consider the best option for strips to be Crest “Supreme FlexFit”, which is tightly fixed to the teeth and allows the strips to adapt well even in areas of uneven teeth. In 2nd place we would put the Crest “Professional Effects” strips. But we do not recommend using Crest “Supreme Professional” strips with 14% hydrogen peroxide. The fact is that even if the strip does not come into contact with the gums, hydrogen peroxide always gets into the oral fluid due to the contact of the gel with saliva. Therefore, when using a 14% concentration, gum burns and a burning sensation in the throat will be practically guaranteed.

Please note that different versions of strips with the same concentration of hydrogen peroxide of 10% are recommended for different times. Moreover, where the exposure of the strips is 30 minutes, the whitening goes by 3-4 tones, and where the exposure is 60 minutes, by about 6-8 tones. In our opinion, the manufacturer deliberately recommends using essentially the same strips - for different times, so that it does not turn out that cheaper strips will be as effective as more expensive ones.

Crest Professional Effects Strips – Before and After

Crest Vivid strips – before and after photos

CONCLUSIONS: in general, the effectiveness of whitening strips can be very high, and under certain favorable conditions (straight teeth, absence of pigment plaque and dental deposits on the teeth, etc.) - the effect of such home therapy can be practically no different from the result of professional whitening in dentist However, before you buy teeth whitening strips, also read about their disadvantages, which we will tell you about later.

Instructions and recommendations for use

All packages of any series of Crest whitening strips contain instructions for attaching them. Only by following the recommendations and rules from the manufacturer will the result be as effective as possible.

This type of home whitening system is simple and includes the following steps:

It is necessary to study the packaging and composition of the product to avoid allergic reactions. Then carefully open and remove the dental strips, which are intended for one-time use only. They can be the same size, but most often the plate is shorter for the lower row of teeth.
Having previously removed the protective adhesive tape from the gel side, it is necessary to evenly attach the plates to the tooth surface and level them until the enamel completely takes the shape. It is most convenient to carry out the procedure in front of a mirror.
Leave the product for the time specified in the instructions, then carefully remove from the mouth. To completely clean your teeth, you need to use a napkin, brush your teeth, or simply rinse your mouth.

Manufacturers categorically do not recommend exceeding the period of exposure of the gel to the teeth, leaving the product in the mouth overnight, or eating or smoking cigarettes during the procedure. If the gel gets into the stomach, unpleasant consequences may occur.

Do not swallow strips or saliva that is released during the procedure. And if discomfort or special sensitivity occurs, it is recommended to reduce or stop the course.

Side effects and disadvantages of whitening strips –

Reviews for whitening strips on all sites are written as carbon copies; the texts of the reviews are more like advertising brochures that praise the strips from different angles, keeping silent about the shortcomings. And although home whitening techniques can indeed be very effective, teeth whitening strips still have significant disadvantages...

They do not whiten fillings and crowns -

Chemical whitening allows you to lighten only the tooth tissue. Fillings, veneers, and any types of artificial crowns cannot be bleached. This means that if you have fillings or crowns on one or more teeth, then after whitening they will look even darker against the background of the whitened enamel of the remaining teeth (Fig. 14). Whitening in such situations will mean the need to subsequently replace veneers, crowns and fillings with lighter shades.

It should also be taken into account that after a few months, the teeth will gradually begin to darken again (the speed of teeth darkening after whitening is related to your habits, for example, smoking, the frequency of drinking coloring drinks and foods). This may mean the need for either new replacement fillings, veneers or crowns, or ongoing periodic courses of home whitening.

Uneven whitening –

Reviews of teeth whitening strips are often negative due to the fact that although the front surfaces of the teeth become much whiter, they remain dark in the interdental spaces. This creates a sharp contrast between dark and light, and the interdental spaces end up looking like black triangles (Fig. 15). Why is this happening...

Firstly, the thickness of the whitening gel on the inner surfaces of the strips is only about 0.2 mm. At the same time, the surface of the teeth is not absolutely smooth, and therefore, when adapting the strips to the teeth, the whitening gel simply does not penetrate sufficiently into the interdental spaces. The second reason lies in the uneven position of the teeth, for example, when they are crowded. In this case, adapting the whitening strip to teeth located deeper (lingually) will be very false, which will mean poor contact of the whitening gel with these teeth.

Thirdly, the problem is that most people use Blendamed or Crest whitening strips without first removing plaque and plaque from the dentist. The fact is that the surfaces of teeth covered with pigment plaque whiten a priori much worse, because coating on these areas will prevent hydrogen peroxide from penetrating into them. And therefore the surface of the teeth in these areas will remain dark.

Pain and sensitivity of teeth -

Clinical studies by Cooperetall in 1992 showed that the penetration of free radicals into the dental pulp occurs within 15 minutes after applying 3% hydrogen peroxide gel to tooth enamel. It is this process, as well as a certain degree of demineralization of enamel and dentin, that leads to the development of increased sensitivity of teeth after whitening.

Sensitivity is expressed in the appearance of pain to thermal stimuli (heat, cold). And the longer the bleaching course continues and/or the higher the concentration of hydrogen peroxide, the stronger the sensitivity will be every day. In this case, you can start using special pastes to relieve sensitivity, or reduce the exposure time of the strips on the teeth, or start using them every other time. And after completing the whitening course, it is worth taking a course of remineralization or fluoridation of teeth.

Important: if you have erosions, carious lesions, deep wedge-shaped defects with exposed dentin on your teeth, then you can predict a very high rate of hydrogen peroxide entering the dental pulp (neurovascular bundle) - with the development of severe pain, and even a chemical burn of the pulp , which may then even require removal of the nerve from the tooth. Therefore, caries and wedge-shaped defects must be cured before using whitening strips (24stoma.ru).

Burns and inflammation of the gums, throat irritation -

About half of all patients also complain of sore gums after using whitening strips. The fact is that the whitening strips have a straight shape - in contrast to the gum line, and therefore, when applying the strips to the teeth, they always come into contact with the interdental gingival papillae. As we said above, the strips are coated with a gel with hydrogen peroxide with a concentration of 5.25 to 14% (10% on average), which contributes to the development of a chemical burn of the gums.

Inflammation and burn of gums after whitening –

But gel with hydrogen peroxide can cause harm not only to the gums. The whitening gel is located in the moist environment of the oral cavity, so some of the hydrogen peroxide necessarily gets into the saliva. This means that hydrogen peroxide will affect not only the interdental papillae, but also other areas of the gums and the tongue. In addition, when you swallow saliva, hydrogen peroxide will contact the mucous membrane of the throat, causing irritation. To reduce such side effects, always rinse your mouth after removing strips, reduce exposure time, or use strips with a lower concentration.

White spots on teeth -

When you remove the whitening strips, you can often notice white spots appearing on the enamel. In most cases this is not a problem, because... occurs due to drying out of the enamel area due to the fact that the strips isolate the front surface of the teeth from contact with saliva. Such stains disappear after a few hours (after the enamel is saturated with moisture).

However, if you use low-quality whitening strips (the whitening gel will have an acidic pH), you can end up with chalky white spots on your enamel that will last a lifetime. This can also happen if the enamel of your teeth has poor resistance to chemical and mechanical factors, which occurs against the background of demineralization of the enamel. Generalization means that your enamel contains very little calcium, i.e. as if porous.

If there are white chalky spots on your teeth even before whitening, then this is one of the signs of enamel demineralization, which means that any type of chemical whitening will be contraindicated for you. The use of chemical bleaching against the background of enamel demineralization will lead to an even greater loss of calcium from dental tissues, which will increase the risk of tooth decay (as a result of increased abrasion or the development of caries).

Instructions for use of the Crest 3D White Whitestrips with Light teeth whitening kit

Step 1. Take the strips.
Apply the upper teeth strip (long) to the upper teeth, exactly along the gum line, so that the tooth enamel is completely covered. Fold the strips at the bottom and glue them to the back of the teeth. Apply the strip for the lower teeth in the same way. Wear the strips for 60 minutes (1 hour). Step 2. After the 60 minutes are over, take the home teeth whitening lamp, press and hold both buttons at the same time until the light turns on, then release the buttons.

Step 3. Place the lamp so that the light flux is directed towards the upper row of teeth with the strips glued to the teeth, hold until the light turns off automatically after a few minutes.

Step 4: Turn on the at-home teeth whitening light again (repeat Step 2), and place the light against the bottom teeth covered with the strip until the light turns off automatically (approximately 7 minutes).

Step 5. Remove the device from the mouth and remove the used strips from the teeth. The session is over.

The duration of the course is 10 days.

Operating principle of a lamp for teeth whitening at home

A special blue light from a portable device lamp (wavelength 500 nm), with a directed glow, affects the main component of the whitening strips - carbamide peroxide, active oxygen begins to be intensively generated, penetrates the tooth enamel and pushes out the molecules of pigment spots from it.

Light intensity of the lamp – 95,000 mcd

How to Care for Crest 3D White Whitestrips with Light Home Teeth Whitening Kit

The lamp is waterproof in the part that is directly in the oral cavity during the session. After the procedures, it is recommended to wash the light emitter with ordinary running water and soap, then wipe all elements of the lamp with a dry cloth.

The home teeth whitening lamp is a reusable product. The lamp can be reused with other CREST 3D WHITE products (strips, gels, trays for teeth whitening at home) to enhance the whitening effect.

The lamp comes with batteries and is ready for use. In the future, the batteries can be replaced by the user.

Cautions:

This at-home teeth whitening kit is intended for whitening natural teeth only; do not attempt to whiten dentures, crowns, porcelain heads, fillings or bridges with this kit!
Does not remove stains on enamel caused by taking tetracycline drugs.
Possible discomfort in the gums and increased sensitivity of teeth to some ingredients of dental strips are integral parts of any whitening procedure, even such a high-tech one as Crest 3D White Whitestrips with Light. This is not dangerous and goes away quickly without any medical intervention.
Do not use during sleep!
Not recommended for use by people under 18 years of age.

Contraindications for use:

oral cancer;
period of treatment with photodynamic drugs;
the presence of photosensitive ingredients in the medications taken, such as aminolevulinic acid or porphyrin.

Benefits of a Home Teeth Whitening Kit

The most significant whitening effect of all possible, including professional whitening in a dental clinic.
Absolutely safe. Only proven ingredients are used; acids and other aggressive compounds are excluded from the formula.
The longest result from whitening is 3 years!
The lamp for teeth whitening at home is universal; it can be used many times with other strips and gels.
Ease of use.

Product information

We sell only new original Procter and Gamble products, made in the USA. Please note that our product is protected from counterfeiting, manufactured in the USA, FDA approved, certified. Product in stock.

How harmful are whitening strips to tooth enamel?

Hydrogen peroxide, with prolonged exposure, penetrates not only into the entire depth of enamel and dentin, but even into the dental pulp (neurovascular bundle). There are numerous studies that confirm the slight negative effect of peroxide compounds on tooth tissue...

Chemical bleaching with hydrogen peroxide can negatively affect the surface texture and shine of the enamel if the gel on the surface of the whitening strips has an acidic pH. In this case, erosions, chalky spots with a matte surface may appear on the enamel surface, and loss of enamel shine may occur. High-quality whitening strips contain sodium hydroxide or its analogues (make the pH neutral).
Clinical studies by Sighiand Denry 1992 and McCracken et al. 1996 - showed that chemical bleaching leads to a slight decrease in the strength of enamel and its wear resistance to abrasives and chemicals. This occurs due to demineralization of enamel and dentin, i.e. their loss of calcium. Studies have confirmed that the preventive use of a course of fluoride after the end of a whitening course can significantly improve the situation.
But the most important thing is that chemical whitening disrupts the bond between tooth dentin and filling materials (light composites, glass ionomer cements). This is confirmed by studies by Della Bona et al. 1992, “Tiunsakeretall” 1990, “Titleyetall” 1991. As a result, the marginal fit of the filling to the tooth tissue deteriorates, which can lead to the development of caries at the filling/tooth interface, as well as the need to replace fillings.

Conclusions: whitening strips with a concentration of hydrogen peroxide up to 10% inclusive are a fairly safe product for home use that does not cause critical changes in the teeth (provided that the product has a slightly alkaline pH, there are no carious lesions on the teeth, and also when good oral hygiene). A slight decrease in the degree of mineralization of enamel and dentin can be compensated for by subsequent courses of remineralization and fluoridation of tooth enamel.

Whitening strips: application diagram

Manufacturers of whitening strips recommend not brushing your teeth before using them, arguing that in this case the bacterial film on the surface of the gums will protect them from excessive irritation. This makes a certain sense, but this does not mean at all that you should have food residues in the spaces between your teeth, and traces of soft plaque at the necks of your teeth. Please note that the interdental spaces must be cleaned with dental floss.

1) Preparing to apply the strips - To improve the adherence of the strips to the teeth, you can remove excess saliva from the front surfaces of the teeth using a dry gauze pad.

2) Applying strips - next, take a wider and shorter strip and, having separated it from the protective layer, carefully, without much pressure, apply it with the gel side to the front surface of the lower teeth. The bottom edge of the strip should run along the gum line. After you are sure that the strip is positioned correctly, press it against your teeth for 2-3 seconds.

Then fold the upper edge of the strip over the cutting edge of the lower front teeth and also press for 2-3 seconds. Fix the second (narrower and longer strip) in the same way - on the teeth of the upper jaw. The exposure time of the strips on the teeth is usually from 30 to 60 minutes, according to the type of strips and instructions.

What the overlay of stripes looks like: video

3) Clean your hands – when applying the strips, you will definitely get the hydrogen peroxide gel on your fingertips. The smallest thing that can happen is that your fingertips turn white. It will be much worse if you rub your face with unwashed hands or get the gel into your eyes, or if the gel gets from your hands onto the fur or skin of pets. Also, very often patients spoil their clothes, because... Hydrogen peroxide will permanently lighten areas of tissue where it gets in contact.

4) Additional recommendations - as we said above: hydrogen peroxide will in any case get from the whitening gel on the strips into the oral fluid. To avoid unnecessary irritation of the gums and throat, it is advisable to periodically spit out saliva without swallowing it. This process is not very pleasant, so try to use the strips at times when you are not actively salivating (i.e. not on an empty stomach). A small amount of saliva can be swallowed without fear of the above side effects.

If you begin to feel a burning sensation in your gums or throat, immediately remove the strips and rinse the oral mucosa with plain water. Perhaps next time you will need to reduce the time for fixing the strips on your teeth, or start doing them every other time (this will simply lengthen the whitening course), or purchase strips with a lower concentration of hydrogen peroxide. And lastly, after completing such a home whitening course, always have your enamel fluoridated at the dentist.

Also, during the whitening course, you should give up highly abrasive toothpastes to compensate for the temporary decrease in enamel wear resistance, as well as drinks and foods with a high acid content (wine, fruit juices...), as well as smoking. If you use an electric toothbrush for hygiene, then for some time it is better to use either the attachment for sensitive teeth or the “gentle brushing” mode without pulsating movements.

Instructions for use Crest Whitestrips

How to properly use Crest Whitestrips teeth whitening strips Instructions for use

1) Separate the strip of gel from the plate on which it is located. 2) Stand in front of a mirror and apply the whitening gel pad to the teeth. Align the plate with the gum line and press firmly against the teeth. 3) Fold the protruding edges inside the dentition. 4) Keep it on your teeth depending on the course you choose.

If you dream of a Hollywood smile and want to have white teeth, then Crest Whitestrips 3D White whitening strips will become an indispensable assistant for you on the way to your dream. Crest Whitestrips 3D White whitening strips will give you dazzling white teeth. You can carry out the whitening procedure yourself at home. It will cost much less than professional whitening in a dental office, and the result will be no worse. After all, they use the same components as in the procedure performed by a professional. The strips can be used whenever it is convenient for you because they are simply on your teeth while you go about your business - cooking, watching your favorite show, sitting at the computer. With Crest Whitestrips 3D White you get excellent results with minimal effort. White teeth at home is real!

Video instructions for applying Crest Whitestrips

Easy to use

Using the strips is ridiculously easy. After opening the package, remove the strip and remove the protective coating from it. Please note that the strips are of different lengths. The longer ones are for the upper teeth, and the shorter ones for the lower ones. Using a mirror, apply the strips with the gel side on the outer surface of the teeth and align them with the gum line, then press firmly to the teeth. Make sure that the gel is evenly applied to the surface of the teeth and fills the gaps between them. The time for applying the strip is from 5 to 30 minutes, you select it depending on the selected whitening system. After the procedure, gently brush your teeth. Used strips cannot be reused.

Recommendations for people with sensitive teeth: If the sensitivity of your teeth increases during the procedure, you can take a break for two days. Increased sensitivity is not dangerous and is not an indication to stop using the whitening course. The increase in sensitivity goes away after finishing using the strips. If the teeth themselves are sensitive, Crest Whitestrips 3D White Stain Shield and Crest Whitestrips 3D White Gentle Routine whitening strips are recommended.

Recommendations for using Crest Whitestrips 3D White:

When using Crest Whitestrips 3D White whitening strips, it is worth remembering some recommendations: whitening strips are applied once a day. Strips for whitening sensitive teeth are also applied once a day, but only for 5 minutes. When using strips, avoid getting the gel on clothing and skin, as this may cause irritation. If the gel does get on your skin, wash it with running water and soap. If the gel gets into your eyes, rinse them with warm water. While using the shelves, smoking, eating, and sleeping are prohibited. It is advisable not to consume coloring foods during the course - red wine, coffee. There is no need to brush your teeth before using the strips. The strips are not recommended for use by women during pregnancy and lactation, children under 16 years of age and people wearing braces. Do not swallow. Keep out of reach of children

Contraindications for bleaching –

The development of allergic reactions to the whitening strips Cross and Blendamed is possible. If you are allergic to any of the components, you must avoid using them. There are also a number of diseases and conditions in which the use of whitening strips will be contraindicated.

Contraindications to whitening strips –

presence of enamel erosions,
the presence of areas of enamel demineralization (in the form of white chalky spots),
the presence of untreated caries,
with the frequent appearance of new carious lesions,
the presence of deep wedge-shaped defects with exposure of dentin,
during pregnancy and breastfeeding,
for diabetes mellitus,
You must stop smoking for the entire whitening period.
with severe degrees of fluorosis, enamel hypoplasia or tetracycline staining,
in adolescents under 18 years of age (at this age there is still a large volume of pulp chambers, which can lead to a chemical burn of the pulp and the need for tooth depulpation).